[ Chinese | English ]  
Home About Reach News Products Contact us   Add To Wishlist
 
Products
     
  Rubber Chemicals And Additives
  Rubber Release Agent
  Tire Auxiliary Products
  High Dispersion Colloidal Particle
  Rubber Compound
  Rubber Raw Materials
  Carbon Black
  Rubber Processing Auxiliary Products
  Tires
     
 
 
 
  Products Your present position:REACHTIRE INDUSTRIAL CO.,LTD > Products
 
Previous: Mold release agent SMK-60A Bladder Coating Agent SBC-7086 Next:

Description

  Bladder coating agent SBC-7086 is the product of the technology cooperation between China and Germany.It is a semi-permanent tire bladder release agent.It is free from solvents and silicone oil. The active ingredient is a reactive silicone polymer.The product provides a long store time and a steady property.It has no terrible smell. Low consumption and a short drying time make the product very economical.The product provides an excellent slippage of the bladder into the green tire and a very good release effect after the cure. Its use will extend bladder life and prevent air traps and tire shrinkage.So scrap parts will be reduced.

Application fields

  Semi-permanent bladder coating agent for passenger car tire, truck tire and rubber production.

Application

  As a first step the bladder has to be cleaned using alcohol to be sure there are no residues left that might impair the coating. Bladder coating agent SBC-7086 is then applied by wiping it directly on the new bladder in an undiluted form.Afterwards you should give enough time for the coating to dry and to bond on the surface of the bladder (about one day). At the time of cure bladder coating agent SBC-7086 needs to be diluted with water in the ratio 1:2 to1:5.It is sprayed on the surface of the bladder using atomizing or airless spray systems. The product has virtually no tendency towards sedimentation. However, we recommend to stir it gently during processing. The product needs to be wiped per 1-2 times cure before 10 times cure , from then on it is wiped one time for one day or one class.

Technical Data

  Composition: emulsion of reactive silicone polymers

Appearance

white emulsion                                                                                                      PH Value: 7-9
Active substance content , 4 h/105 °C: 18-22%

Safety and Transport

  Bladder coating agent SBC-7086 is not classified as a dangerous good according to transport legislation. So we should transport it in term of undangerous good.It has not any hurt if you use it in right way.

Storage

  Bladder coating agent SBC-7086 should be stored in tightly sealed containers and has to be protected from frost, heat and direct sunlight. If these rules are obeyed, the product can be stored for at least one year. The production date is stated on the lot number on the labels of each container.

Further information

  Product technical information and data is based on the best information available and does not constitute or imply a warranty or patent infringement of any kind. The user is responsible for testing product suitability prior to use in production.

Qingdao,Shandong,China Tel: 0086-532-67773206

Copyright QINGDAO REACHLINK SCIENCE & TECHNOLOGY CO.,LTD 鲁ICP备11016771号-1