[ Chinese | English ]  
Home About Reach News Products Contact us   Add To Wishlist
  Rubber Chemicals And Additives
  Rubber Release Agent
  Tire Auxiliary Products
  High Dispersion Colloidal Particle
  Rubber Compound
  Rubber Raw Materials
  Carbon Black
  Rubber Processing Auxiliary Products
  Products Your present position:REACHTIRE INDUSTRIAL CO.,LTD > Products
Previous: PU Carbon Black Powder Batch-off Release Agent PRP-30D Next: Internal release agent for rubber compound FNS-926


  Release Agent PRP-30D is a powder batch-off release agent.It prevents the adhesion of uncured rubber and milled sheets during storage. Release Agent PRP-30D consists of inorganic fillers and active substances . Release Agent PRP-30D shows good wetting and release properties for all types of rubber independent of softness and stickiness. Release Agent PRP-30D is well tolerated by the rubber and there is no influence to flow behavior or other properties during vulcanization.

Application fields

  Release Agent PRP-30D is as a powder batch-off release agent suited for all kinds of elastomeres.


  For Release Agent PRP-30D we recommend a concentration of approx. 2.5%-4.5%, depending on the air temperature of machining workshop, rubber composition and shore hardness of the rubber mixture.High concentration is usual applied for sticking rubber in summer ,whereas low concentration.
  Release Agent PRP-30D forms thin,flexible film on the surface of milled sheets.The film has good release properties and prevents the formation of dust,which means that it does not cause any problems during subsequent processing. Release Agent PRP-30D only forms slight,soft-deposits on the equipment and these are easily removed.The product has anti-corrosive properties. There is no troublesome foam formation when it is mixed.

Technical Data

  Composition: combination of inorganic fillers and active substances
  Appearence: white powder
  Ash content:approx.65% (950℃)
  Solubility:disperses in water,no deposits in short time



Safety and Transport

  Release Agent PRP-30D is not classified as a dangerous good according to transport legislation, so we should transport it in term of undangerous good. It has not any hurt if you use it in right way.


  Release Agent PRP-30D should be stored under cool and dry conditions. If these rules are obeyed, the product can be stored for at least one year. The production date is stated on the lot on the labels of each sack.

Further information

  Product technical information and data is based on the best information available and does not constitute or imply awarranty or patent infringement of any kind. The user is responsible for testing product suitability prior to use the production.


Qingdao,Shandong,China Tel: 0086-532-67773206